Transfer Case: Notes
WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS
| Adapter for 303-224 (Handle) 205-153 (T80T-4000-W) | |
| Holding Fixture, Drive Pinion Flange 205-126 (T78P-4851-A) | |
| Holding Fixture, Transmission 307-003 (T57L-500-B) | |
| Installer, Drive Pinion Bearing Cup 205-138 (T80T-4000-D) | |
| Installer, Drive Pinion Bearing Cup 205-140 (T80T-4000-F) | |
| Installer, Input Shaft Bearing 308-412 | |
| Installer, Input Shaft Oil Seal 308-408 | |
| Installer, Output Shaft Front Bearing 308-410 | |
| Installer, Output Shaft Oil Seal 308-403 | |
| Installer, Output Shaft Oil Slinger 308-399 (Part of Kit 308-S398) | |
| Installer, Output Shaft Oil Slinger 308-400 (Part of Kit 308-S398) | |
| Installer, Output Shaft Rear Bearing 308-401 | |
| Installer, Output Shaft Rear Bearing 308-411 | |
| Installer, Rear Axle Oil Seal 205-155 (T80T-4000-Y) | |
| Installer, Transfer Case Needle Bearing 308-402 | |
| Remover, Front Pump Bushing 307-016 (T66L-7003-C2) | |
| Remover, Torque Converter Oil Seal 307-309 (T94P-77001-BH) | |
| Sleeve, Input Shaft Snap Ring 308-406 | |
| Sleeve, Output Shaft Front Snap Ring 308-405 | |
| Sleeve, Output Shaft Rear Snap Ring 308-404 | |
| Slide Hammer 100-001 (T50T-100-A) | |
| Socket, Sector Shaft Nut 308-407 | |
| Spreader, Transfer Case Housing 308-396 | |
| Universal Puller Set 303-DS005 (D80L-100-A) |
MATERIAL
| Item | Specification |
|---|---|
| Metal Surface Cleaner F4AZ-19A536-RA | WSE-M5B392-A |
| Silicone Gasket and Sealant F7AZ-19554-EA | WSE-M4G323-A4 |
| Multi-Purpose Grease D0AZ-19584-AA | ESB-M1C93-B |
| Pipe Sealant with Teflon® D8AZ-19554-A | WSK-M2G350-A2 |