LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Engine Removal, Overhaul & Installation - F150 Pickup - Bi-Fuel) >> Introduction

Section 86 (Engine Removal, Overhaul & Installation - F150 Pickup - Bi-Fuel): Introduction

WARNING: This page is about a different car, the 2002 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

The 5.4L engine is available with two bi-fuel options, Liquid Propane Gas (LPG) or Compressed Natural Gas (CNG). The fuel control system on these engines is separate from the gasoline fuel system and has unique parts. This article only covers removal, overhaul and installation procedures for alternate fuel components on bi-fuel vehicles. Procedures for systems and components that are the same as gasoline powered models are not included in this article. See REMOVAL, OVERHAUL & INSTALLATION - BLACKWOOD, EXPEDITION, F150 PICKUP & NAVIGATOR - GASOLINE article. Alternate fuel powered vehicles utilize special fuel filler valve, fuel tanks, fuel pressure regulator, coalescent filter assembly, fuel lines, fuel rails and fuel injectors. See Fig 1-Fig 3 .

Fig 1: Locating Bi-Fuel Compressed Natural Gas System Components (F150 Pickup)
G00018659Courtesy of FORD MOTOR CO.
Fig 2: Locating Bi-Fuel Liquid Propane Gas System Components (F150 Pickup)
G00132456Courtesy of FORD MOTOR CO.
Fig 3: Locating Fuel System Components (F150 Pickup)
G99B02486Courtesy of FORD MOTOR CO.