LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 852 (Safety Belt System) >> Removal And Installation >> Safety Belt - Rear 3-Passenger Bench Seat >> Removal

Safety Belt - Rear 3-Passenger Bench Seat: Removal

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use the Safety Belt Bolt Torx Bit to remove the LH rear bolt and safety belt buckle.
    Fig 1: Locating LH Rear Safety Belt Buckle Bolt
    G03891231Courtesy of FORD MOTOR CO.
  2. Remove the LH rear safety belt buckle assembly.
    Fig 2: Locating LH Rear Safety Belt Buckle Assembly
    G03891232Courtesy of FORD MOTOR CO.
  3. Use the Safety Belt Bolt Torx Bit to remove the RH rear safety belt and buckle bolt.
    Fig 3: Locating RH Rear Safety Belt Buckle Bolt
    G03891233Courtesy of FORD MOTOR CO.
  4. Remove the RH rear safety belt buckle and tongue assembly.
    Fig 4: Identifying RH Rear Safety Belt Buckle And Tongue Assembly
    G03891234Courtesy of FORD MOTOR CO.