LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 850 (Wiper System And Washer System) >> General Procedures >> Windshield Wiper Blade and Pivot Arm Adjustment

Windshield Wiper Blade and Pivot Arm Adjustment

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Cycle and park the windshield wipers.
  2. Verify that the distance between the center of the RH windshield wiper blade (17528) and the cowl top vent panel is within specification.
    Fig 1: Identifying Distance Between Center Of RH Windshield Wiper Blade And Cowl Top Vent Panel
    G03891174Courtesy of FORD MOTOR CO.
  3. Verify that the distance between the center of the LH windshield wiper blade and the cowl top vent panel is within specification.
    Fig 2: Identifying Distance Between Center Of LH Windshield Wiper Blade And Cowl Top Vent Panel
    G03891175Courtesy of FORD MOTOR CO.
  4. If the distance is not within specification, remove the windshield wiper pivot arm (17526) that is not within specification and reposition it to specification. For additional information, refer to WIPER PIVOT ARM .
scientia non olet · About LEMON Manuals