LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 850 (Wiper System And Washer System) >> Diagnosis And Testing >> Wipers and Washers >> Component Test - Windshield Wiper Motor >> Washer Pump Relay (Integral)

Washer Pump Relay (Integral)

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

Test the windshield wiper motor internal washer relay function by measuring the voltage between the windshield wiper motor (4) component side pin 7 (8), and ground while grounding the windshield wiper motor (4) component side pin 12 (9). When wash command input pin 12 is grounded, measured voltage should read 10 volts or greater.

scientia non olet · About LEMON Manuals