LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Engine Controls - Removal, Overhaul & Installation) >> Ignition Systems >> Crankshaft Position Sensor >> Removal & Installation (3.0L)

Removal & Installation (3.0L)

WARNING: This page is about a different car, the 2002 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support vehicle. Remove right front splash shield. Unplug Crankshaft Position (CKP) sensor wire connector from engine harness. Remove CKP sensor mounting bolt. Remove CKP sensor. To install, reverse removal procedure. Tighten fasteners to specification. See TORQUE SPECIFICATIONS .

scientia non olet · About LEMON Manuals