LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Engine Controls - Removal, Overhaul & Installation) >> Fuel Systems >> Fuel Rails & Injectors >> Installation

Fuel Rails & Injectors: Installation

WARNING: This page is about a different car, the 2002 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse removal procedure. Lubricate NEW "O" rings with light oil. DO NOT use silicone grease.
  2. Install fuel rail and injectors in intake manifold. Ensure injectors are seated. Secure fuel manifold assembly with retaining bolts. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals