LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Engine Controls - Removal, Overhaul & Installation) >> Fuel Systems >> Fuel Line Connectors >> "R" Clip Coupling

"R" Clip Coupling

WARNING: This page is about a different car, the 2002 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE . Remove shipping tab by bending tab downward. Spread "R" clip and push clip into fitting. See Fig 1. Separate fitting from tube.
  2. Before installation, lubricate male tube end with clean engine oil. Insert "R" clip into fitting. Align tube and fitting. Insert tube into fitting and push together until a click is heard. Pull on connection to ensure engagement.
Fig 1: Disconnecting Fuel Lines With "R" Clip Coupling
G99I02480Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals