LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Engine Controls - Removal, Overhaul & Installation) >> Evaporative Emissions Systems >> Purge Valve >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2002 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Purge valve is located next to master cylinder. Disconnect canister purge valve harness connector, vacuum hose, outlet tube and return tube. Remove nuts and purge valve.
  2. To install, reverse removal procedure. Perform after repair procedure. See AFTER REPAIR PROCEDURE .
scientia non olet · About LEMON Manuals