LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Engine Controls - Removal, Overhaul & Installation) >> Emissions Systems & Subsystems >> Cylinder Head Temperature Sensor >> Removal & Installation (2.0L)

Removal & Installation (2.0L)

WARNING: This page is about a different car, the 2002 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

Remove generator. Remove cylinder head temperature sensor. To install, reverse removal procedure. Tighten cylinder head temperature sensor to specification. See TORQUE SPECIFICATIONS .

scientia non olet · About LEMON Manuals