LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Engine Controls - Removal, Overhaul & Installation) >> Air Induction Systems >> Intake Manifold >> Installation

Intake Manifold: Installation

WARNING: This page is about a different car, the 2002 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

Clean gasket mating surfaces. Use NEW upper manifold gaskets. Tighten bolts in sequence to specification. See Figure. See TORQUE SPECIFICATIONS . To complete installation, reverse removal procedure.

scientia non olet · About LEMON Manuals