LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Engine Controls - Removal, Overhaul & Installation) >> Air Induction Systems >> Idle Air Control Valve >> Removal & Installation (2.0L)

Removal & Installation (2.0L)

WARNING: This page is about a different car, the 2002 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect Idle Air Control (IAC) valve harness connector. Raise and support vehicle. Remove IAC valve and discard gasket. To install, reverse removal procedure. Use new gasket. Tighten IAC valve mounting bolts to specification. See TORQUE SPECIFICATIONS .

scientia non olet · About LEMON Manuals