LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 849 (Door System - Handles, Locks, Latches And Entry Systems) >> Diagnosis And Testing >> Locks, Latches and Entry Systems - Non Module Controlled >> Inspection and Verification

Inspection and Verification

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern.
  2. Visually inspect for obvious signs of mechanical or electrical damage.
    VISUAL INSPECTION CHART

    Mechanical Electrical
    • Binding latch mechanisms
    • Binding linkage
    • Misaligned door
    • Battery junction box (BJB) fuse 22 (60A)
    • Central junction box (CJB) fuse 5 (30A)
    • Circuitry
    • Door lock control switch
    • Door lock actuator
    • Remote transmitter
  3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
  4. If the cause is not visually evident, verify that symptom and GO to SYMPTOM CHART .