LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 846 (Rear View Mirrors) >> Diagnosis And Testing >> Rear View Mirrors >> Inspection and Verification

Inspection and Verification

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern by operating the power exterior rear view mirrors.
  2. Visually inspect for obvious signs of mechanical and electrical damage. Refer to the following VISUAL INSPECTION CHART :
    VISUAL INSPECTION CHART

    Mechanical Electrical
    • Damaged mirror(s)
    • Fuse
    • Damaged exterior mirror control switch
    • Circuitry
     
    • Exterior mirror control switch
  3. Verify components or systems related to the fuse for correct operation. If the components or systems are not operating correctly, the fuse(s), fuse feed circuits or fuse load side circuit(s) may be faulty.
  4. If the fault is not visually evident, determine the symptom. GO to SYMPTOM CHART .