LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Engine Controls - Removal, Overhaul & Installation -- ECONOLINE, Excursion & F250-F550 Super Duty - Gasoline) >> Fuel Systems >> Fuel Line Connectors >> Push Connect Coupling

Push Connect Coupling

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2002 Ford RV Cutaway, 2002 Ford Pickup, 2002 Ford F550 Super Duty, 2002 Ford F450 Super Duty, and 2002 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE . Disconnect safety clip from male hose. See Fig 1. Install Fuel Line Disconnect (T90T-9550-S) and push it into fitting. Separate fittings.
  2. Before installation, lubricate tube end with clean engine oil. Align tube to fitting and push until a click is heard. Pull on fitting to ensure engagement. Install safety clip.
Fig 1: Disconnecting Fuel Lines With Push Connect Coupling
G99E02483Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals