Belt Minder Deactivating/Activating: Preparation
WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Before deactivating/activating the safety belt minder, set the parking brake.
- Place the transmission in PARK.
- Turn the key to the OFF position.
- Close all the vehicle doors.
- Unbuckle the driver safety belt.
- Place the headlamp switch in the OFF position.