LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Engine Controls - Removal, Overhaul & Installation) >> Evaporative Emissions Systems >> After Repair Procedure

After Repair Procedure

WARNING: This page is about a different car, the 2002 Mercury Grand Marquis, 2002 Lincoln Town Car, and 2002 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.

After servicing evaporative system components, perform leak test. See EVAPORATIVE EMISSIONS SYSTEM LEAK TEST under SYSTEM TESTS (EVAPORATIVE EMISSION) in SELF-DIAGNOSTICS - EEC-V - GASOLINE & NGV article. Perform Evaporative Emission Running Loss Monitor Repair Verification Drive Cycle. See EVAPORATIVE EMISSION LEAK CHECK MONITOR under DIAGNOSTIC MONITORS in SELF-DIAGNOSTICS - EEC-V - GASOLINE & NGV article.