Turbocharger Inlet Y-Pipe: Removal

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

Remove the engine cover. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
Remove the LH turbocharger inlet Y-pipe bolts.

Fig 1: Identifying Turbocharger Adapter Pipe Bolts
Courtesy of FORD MOTOR CO.
Remove the RH turbocharger inlet Y-pipe bolts.

Fig 2: Identifying Turbocharger Adapter Pipe RH Bolts
Courtesy of FORD MOTOR CO.

NOTE: There is metal gasket between the exhaust inlet pipe and the exhaust gas recirculation (EGR) cooler.

Fig 3: Identifying EGR Cooler Clamp Bolt

Courtesy of FORD MOTOR CO.

Remove the turbocharger inlet Y-pipe-to-EGR cooler clamp.
Remove the turbocharger inlet clamp.

Fig 4: Identifying Turbocharger Inlet Clamp
Courtesy of FORD MOTOR CO.
Carefully remove the turbocharger inlet Y-pipe assembly from the vehicle.