LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 816 (Transmission Cooling System) >> Removal And Installation >> Auxiliary Transmission Fluid Cooler >> Installation

Auxiliary Transmission Fluid Cooler: Installation

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the auxiliary transmission fluid cooler.
  2. Connect the fluid cooler hoses to the auxiliary transmission fluid cooler. Install the hose clamps.
  3. Install the radiator grille opening panel reinforcement. For additional information, refer to FRONT END BODY PANELS .
  4. Fill the transmission with the specified type and quantity of clean transmission fluid. For additional information, refer to SPECIFICATIONS .
  5. Check for leaks.
scientia non olet · About LEMON Manuals