LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 815 (Automatic Transmission - 5R110W) >> Diagnosis And Testing >> Pinpoint Tests - OSC Equipped Vehicle >> P2701 >> Testing

Pinpoint Tests - OSC Equipped Vehicle: P2701: Testing

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

Overdrive Clutch failed on or off. REFER to PID P0730_Status Chart , found immediately after Output State Control (OSC) Mode, for a specific failure. REFER to the SOLENOID APPLICATION CHARTS  located at the beginning of Pinpoint Tests - OSC Equipped Vehicles. If other solenoid DTCs are present GO to PINPOINT TEST A . If only P0730 and/or 2700 series DTCs are present, INSTALL the appropriate clutch solenoid. CLEAR DTCs, road test. If the concern is still present, REPAIR/INSTALL new internal transmission components.

scientia non olet · About LEMON Manuals