LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 814 (Automatic Transmission - 4R70W, 4R75W) >> In-Vehicle Repair >> 1 - 2 Accumulator >> Removal

1 - 2 Accumulator: Removal

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Compress the 1 - 2 accumulator cover and remove the accumulator piston retaining ring.
    Fig 1: Locating Accumulator Piston Retaining Ring
    G03888654Courtesy of FORD MOTOR CO.
    2. NOTE: Note the location of the 1 - 2 accumulator springs for reference during assembly.
  2. Remove the 1 - 2 accumulator.
    1. Remove the 1-2 accumulator cover.
    2. Remove the inner and outer 1 - 2 accumulator springs.
    3. Remove the accumulator piston.
    4. Remove the upper 1-2 accumulator spring.
      Fig 2: Removing Accumulator Piston
      G03888652Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals