LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 814 (Automatic Transmission - 4R70W, 4R75W) >> Description And Operation >> Transmission Electronic Control System >> Output Shaft Speed (OSS) Sensor

Output Shaft Speed (OSS) Sensor

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

The output shaft speed (OSS) sensor is a magnetic pickup, located at the output shaft ring gear, that sends a signal to the powertrain control module (PCM) to indicate transmission output shaft speed. The OSS sensor is used for torque converter clutch (TCC) control, shift scheduling and to determine electronic pressure control (EPC).

scientia non olet · About LEMON Manuals