LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 805 (Starting System - Gasoline Engines) >> Diagnosis And Testing >> Starting System >> Inspection and Verification

Inspection and Verification

WARNING: This page is about a different car, the 2005 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
    WARNING: When servicing the starter motor or carrying out other underhood work in the vicinity of the starter motor, be aware that the heavy gauge battery input lead at the starter solenoid is electrically hot at all times. Failure to follow these instructions may result in personal injury.
  1. Verify the vehicle owner's original concern by operating the system to duplicate the condition.
  2. Inspect the system to determine if any of the following mechanical or electrical concerns apply.
    VISUAL INSPECTION CHART

    Mechanical Electrical
    • Starter motor mounting
    • Starter relay mounting
    • Battery condition
    • Electrical connections at the switches, relay and solenoid
    • Fuse
  3. If the concern(s) remains after the inspection and verification, determine the symptoms. GO to SYMPTOM CHART .
    • Always check the connection between the battery cable and engine compartment wiring harness. Secure the connection as needed.