LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 805 (Starting System - Gasoline Engines) >> Diagnosis And Testing >> Starting System >> Component Tests >> Starter Motor - Starter Drive Test

Starter Motor - Starter Drive Test

WARNING: This page is about a different car, the 2005 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the starter motor.
  2. Secure the starter motor in a vise.
  3. Connect the battery ground cable of a fully charged battery to the case of the starter motor.
    4. CAUTION: Do not leave the positive lead of the battery connected to the starter motor S-terminal for more than 10 seconds.
  4. Touch the positive lead from the battery to the S-terminal and verify that the starter drive ejects.
  5. Remove the positive lead from the starter motor. The ejected starter drive should return to its original position.
  6. If the starter drive does not eject and return to position, install a new starter motor.
  7. Check the starter drive. It should turn freely in one direction, and positively engage to the armature when turned in the opposite direction. If not as specified, install a new starter motor.
scientia non olet · About LEMON Manuals