LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 804 (Fuel Charging System - Turbocharger) >> Diagnosis And Testing >> Turbocharger >> Component Tests >> Bearing Clearance Check >> Check Axial End Play

Check Axial End Play

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Radial shaft movement cannot readily be measured on this turbocharger.
  1. Position the dial indicator on the turbine end of the radial shaft and zero the indicator.
  2. Move the radial shaft back and forth by hand and record the reading.
    Fig 1: Checking Axial End Play
    G03888075Courtesy of FORD MOTOR CO.
  3. If readings exceed specifications, install a new CHRA  . Refer to Turbocharger Reconditioning .
scientia non olet · About LEMON Manuals