LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 799 (Engine - 6.0L Diesel -- E350 & E450) >> In-Vehicle Repair >> Exhaust Manifold - RH >> Removal

Exhaust Manifold - RH: Removal

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .
  3. Remove the engine cover. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
  4. Prior to removing the exhaust manifold, inspect the exhaust manifold for warpage with a feeler gauge between the manifold and the cylinder head. Record the measurement and compare with the specifications.
  5. Remove the RH bolts for the turbocharger adapter pipe.
    Fig 1: Removing RH Bolts For Turbocharger Adapter Pipe
    G03887224Courtesy of FORD MOTOR CO.
    6. NOTE: Top bolts shown, bottom bolts similar.
    Fig 2: Removing Bolts
    G03887225Courtesy of FORD MOTOR CO.
  6. Remove the bolts and the RH exhaust manifold.
scientia non olet · About LEMON Manuals