LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 799 (Engine - 6.0L Diesel -- E350 & E450) >> In-Vehicle Repair >> Exhaust Manifold - LH >> Removal

Exhaust Manifold - LH: Removal

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Remove the engine cover. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
  3. Prior to removing the exhaust manifold, inspect the exhaust manifold for warpage with a feeler gauge between the manifold and the cylinder head. Record the measurement and compare with the specifications.
  4. Remove the LH bolts for the turbocharger adapter pipe.
    Fig 1: Removing LH Bolts
    G03887218Courtesy of FORD MOTOR CO.
  5. Disconnect the exhaust back pressure tube.
    Fig 2: Disconnecting Exhaust Back Pressure Tube
    G03887219Courtesy of FORD MOTOR CO.
    6. NOTE: Bottom bolts shown, top bolts similar.
    Fig 3: Removing Bolts
    G03887220Courtesy of FORD MOTOR CO.
  6. Remove the bolts and the LH exhaust manifold.
scientia non olet · About LEMON Manuals