LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 798 (Engine - 6.8L- E350 & E450) >> In-Vehicle Repair >> Crankshaft Rear Seal >> Removal

Crankshaft Rear Seal: Removal

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the flexplate. For additional information, refer to FLEXPLATE .
  2. Use the special tools to remove the crankshaft rear oil slinger.
    Fig 1: Removing Crankshaft Rear Oil Slinger
    G03885490Courtesy of FORD MOTOR CO.
  3. Use the special tools to remove the crankshaft rear seal.
    Fig 2: Removing Crankshaft Rear Seal Using Special Tool
    G03885491Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals