LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 798 (Engine - 6.8L- E350 & E450) >> In-Vehicle Repair >> Crankshaft Pulley >> Removal

Crankshaft Pulley: Removal

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Remove the engine cooling fan and fan shroud. For additional information, refer to ENGINE COOLING .
  3. Remove the accessory drive belt. For additional information, refer to ACCESSORY DRIVE .
  4. Remove the crankshaft pulley bolt.
  5. Using the special tool, remove the crankshaft pulley.
    Fig 1: Removing Crankshaft Pulley
    G03886425Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals