LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 797 (Engine - 4.6L And 5.4L) >> In-Vehicle Repair >> Hydraulic Lash Adjuster >> Removal

Hydraulic Lash Adjuster: Removal

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the camshaft roller followers. For additional information, refer to CAMSHAFT ROLLER FOLLOWER .
    2. NOTE: The valve tappets are positional. Mark each valve tappet for installation in its original location.
    Fig 1: Identifying Hydraulic Lash Adjusters
    G03885650Courtesy of FORD MOTOR CO.
  2. Remove the valve tappets.
scientia non olet · About LEMON Manuals