LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 797 (Engine - 4.6L And 5.4L) >> In-Vehicle Repair >> Crankshaft Rear Seal with Retainer Plate >> Removal

Crankshaft Rear Seal with Retainer Plate: Removal

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil pan. For additional information, refer to OIL PAN .
  2. Remove the flexplate. For additional information, refer to FLEXPLATE .
  3. Using the special tools, remove the crankshaft rear oil seal slinger.
    Fig 1: Removing Crankshaft Rear Oil Slinger
    G03885490Courtesy of FORD MOTOR CO.
  4. Using the special tools, remove the crankshaft rear seal.
    Fig 2: Removing Crankshaft Rear Seal Using Special Tool
    G03885491Courtesy of FORD MOTOR CO.
  5. Remove the six bolts and the crankcase rear seal retainer.
    Fig 3: Identifying Crankshaft Rear Oil Seal Retainer
    G04583880Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals