LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 797 (Engine - 4.6L And 5.4L) >> In-Vehicle Repair >> Crankshaft Pulley >> Removal

Crankshaft Pulley: Removal

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine cooling fan and fan shroud. For additional information, refer to ENGINE COOLING .
  2. Remove the drive belt. For additional information, refer to ACCESSORY DRIVE .
  3. Raise and support the vehicle. For additional information, refer to JACKING & LIFTING .
  4. Remove and discard the crankshaft pulley bolt.
  5. Using the special tool, remove the crankshaft pulley.
    Fig 1: Removing Crankshaft Pulley Bolt Using Special Tool
    G03885277Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals