LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 797 (Engine - 4.6L And 5.4L) >> Disassembly And Assembly Of Subassemblies >> Piston - Pin Connecting Rod, Floating Pin >> Disassembly

Piston - Pin Connecting Rod, Floating Pin: Disassembly

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the clips.
    Fig 1: Identifying Piston Pin Retaining Clips
    G03885866Courtesy of FORD MOTOR CO.
  2. Remove the piston pin from the piston and connecting rod assembly.
    Fig 2: Removing Piston Pin From Piston And Connecting Rod Assembly
    G03921069Courtesy of FORD MOTOR CO.
  3. Remove the connecting rod from the piston.
    Fig 3: Removing Connecting Rod From Piston
    G03921070Courtesy of FORD MOTOR CO.
  4. Clean and inspect the piston and connecting rod. For additional information, refer to ENGINE SYSTEM-GENERAL INFORMATION .
scientia non olet · About LEMON Manuals