LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 796 (Engine System-General Information) >> General Procedures >> Crankshaft Main Bearing Journal Diameter

Crankshaft Main Bearing Journal Diameter

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure each of the crankshaft main bearing journal diameters in at least 2 directions.
    • Refer to appropriate ENGINE article for the procedure.
    • If out of specification, install new components as necessary. Refer to appropriate ENGINE article for the procedure.
      Fig 1: Identifying Crankshaft Main Bearing Journal Diameter Measurements
      G03885008Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals