LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 795 (Steering Column Switches) >> Diagnosis And Testing >> Steering Column Switches >> Pinpoint Tests >> Pinpoint Test D: No Power In Start

Pinpoint Test D: No Power In Start

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. D1 CHECK THE IGNITION SWITCH 
    • Carry out the Ignition Switch Continuity Test. Refer to COMPONENT TESTING for component testing.
    • Does the ignition switch test OK? 
    • Yes  : GO to D2.
    • No  : REPLACE the ignition switch. REFER to IGNITION SWITCH . TEST the system for normal operation.
  2. D2 CHECK CIRCUIT 33 (WH/PK) AND CIRCUIT 1499 (PK/LG) 
    • Key in START position.
    • Does the starter motor engage?