Removal and Installation

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Make sure the wheels are in the straight-ahead position.

Remove the driver air bag module. For additional information, refer to SUPPLEMENTAL RESTRAINT SYSTEM .
Loosen the steering wheel bolt, but do not remove it.

Fig 1: Loosening Steering Wheel Bolt
Courtesy of FORD MOTOR CO.

CAUTION: Removing the steering wheel without using a puller can damage the column bearings.

Fig 2: Detaching Steering Wheel

Courtesy of FORD MOTOR CO.

Using the special tool, detach the steering wheel.
Remove and discard the steering wheel bolt.

Fig 3: Removing Steering Wheel Bolt
Courtesy of FORD MOTOR CO.
Remove the steering wheel while routing the wires from the clockspring through the steering wheel.
To install, reverse the removal procedure.