LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 791 (Power Steering System) >> Removal And Installation >> Power Steering Fluid Cooler >> Removal

Power Steering Fluid Cooler: Removal

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: While repairing the power steering system, care should be taken to prevent the entry of contaminants or premature failure of the power steering components can occur.
  1. Remove the transmission fluid cooler. For additional information, refer to TRANSAXLE/TRANSMISSION COOLING .
  2. Disconnect the power steering hoses at the fluid cooler.
    Fig 1: Disconnecting Power Steering Hoses At Fluid Cooler
    G03884790Courtesy of FORD MOTOR CO.
  3. Remove the 2 power steering cooler bolts and remove the power steering cooler.
    Fig 2: Removing Power Steering Cooler Bolts
    G03884791Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals