General Specifications
WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Item | Specification | ||
|---|---|---|---|
| Lubricants and Sealants (1) | |||
| SAE 75W-140 High Performance Rear Axle Lubricant XY-75W140-QL | WSL-M2C192-A | ||
| Additive Friction Modifier XL-3 | EST-M2C118-A | ||
| Premium Long-Life Grease XG-1-C | ESA-M1C75-B | ||
| Silicone Rubber D6AZ-19562-AA | ESB-M4G92-A or ESE-M4G195-A | ||
| Threadlock and Sealer E0AZ-19554-AA | WSK-M2G351-A5 | ||
| Backlash Specifications | |||
| Backlash between ring gear and pinion teeth | 0.0203-0.304 mm (0.008-0.012 in) | ||
| Ring gear maximum backlash variation between teeth | 0.102 mm (0.004 in) | ||
| Rotational Torque Ranges | |||
| Pinion bearing preload | 1.8-3.3 Nm (16-29 lb-in) | ||
| Differential side gear rotation | 27 Nm (20 lb-ft) | ||
| Capacity | |||
| Conventional axle | 2.72L (5.75 pts) 6.4 mm (0.25 in)-14.3 mm (0.563 in) Below fill hole | ||
| Limited Slip (Traction-Lok) Axle | 2.60L (5.5 pts) 6.4 mm (0.25 in)-14.3 mm (0.563 in) Below fill hole | ||
| Additive friction modifier (L/S only) | 118 ml (4 ounces) | ||
| Clearance Specifications | |||
| Differential case maximum runout | 0.076 mm (0.003 in) | ||
| Maximum axle shaft end play | 0.762 mm (0.030 in) | ||
| Pinion flange maximum radial runout in assembly | 0.305 mm (0.012 in) T.I.R. | ||
| RABS sensor air gap | 0.127 mm (0.005 in)-1.143 mm (0.045 in) | ||
|
|||