LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 777 (Rear Drive Axle/Differential - Ford 8.8-Inch Ring Gear) >> Disassembly And Assembly >> Differential Case and Ring Gear - Traction-Lok® >> Special Tool(s)

Special Tool(s)

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL(S)

G03878581
 2-Jaw Puller 205-D072 (D97L-4221-A) or equivalent
G03904634
 Gauge, Differential Clutch 205-270 (T87T-4946-A) (mandrel for Traction-Lok Differential Gauge 205-135)
G03884234
 Installer, Differential Side Bearing 205-010 (T57L-4221-A2)
G03878628
 Step Plate 205-D016 (D80L-630-5) or equivalent
G03960215
 Gauge, Differential Clutch 205-135 (T80P-4946-A)
G03971446
 Gauge, Differential Clutch 205-022 (T66L-4204-A)
scientia non olet · About LEMON Manuals