LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 777 (Rear Drive Axle/Differential - Ford 8.8-Inch Ring Gear) >> Diagnosis And Testing >> Rear Drive Axle and Differential >> Checking Differential Ring Gear Backlash

Checking Differential Ring Gear Backlash

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the differential housing cover.
  2. Using a suitable dial indicator and the special tool, measure and record the differential ring gear backlash in 4 opposing points on the ring gear.
    Fig 1: Checking Differential Ring Gear Backlash
    G03878483Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals