LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 776 (Wheel Hubs And Bearings - Full Floating Axle - DANA) >> Specifications >> Torque Specifications

Torque Specifications

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Description Nm lb-ft lb-in
NOTE: Torque specifications are for clean, dirt- and paint-free, dry bolt and nut threads. Never use oil or grease on studs or nuts.
Axle shaft bolts(1) 133 98 -
Hub nut (back off 90 degrees, then retighten) 95
 
24
70
 
18
-
Maximum hub rotating torque(2) 2.3 - 20
Rear disc brake bolts 104 77 -
(1) Apply thread sealer to bolts.
(2) Final adjustment is 0 mm (0 in.) end play.