LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 775 (Rear Drive Axle/Differential - DANA 60 And 70) >> In-Vehicle Repair >> Drive Pinion Flange and Drive Pinion Seal >> Special Tool(s)

Special Tool(s)

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS SPECIFICATIONS

G03883597
 2-Jaw Puller 205-D026 (D80L-1002-L) or equivalent
G03878572
 Holding Fixture, Drive Pinion Flange 205-126 (T78P-4851-A)
G03889362
 Remover, Bushing 307-001 (TOOL-1175-AC)
G03918319
 Slide Hammer 100-001 (T50T-100-A)
scientia non olet · About LEMON Manuals