LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 775 (Rear Drive Axle/Differential - DANA 60 And 70) >> Disassembly And Assembly >> Axle Assembly >> Special Tool(s)

Special Tool(s)

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS

G03883597
2-Jaw Puller 205-D026 (D80L-1002-L) or equivalent
G03971298
Adapter for 205-S156 205-159 (T80T-4020-F42)
G03884131
Adapter for 205-S127 205-111 (T76P-4020-A11)
G03884076
Adapter for 205-S156 205-160 (T80T-4020-F43)
G03883676
Alignment Adapter 205-D031 (D85T-4020-F46) or equivalent
G03883467
Gauge Tube 205-D033 (D80T-4020-F48) or equivalent (for use on model 60 axles)
G03883602
Gauge, Disc 205-D030 (D80T-4020-F45) or equivalent
G03878636
Dial Indicator Gauge with Holding Fixture 100-002 (TOOL-4201-C)
G03901829
Dial Indicator Gauge with Holding Fixture 100-D002 (D78P-4201-B) or equivalent
G03883754
Gauge, Clutch Housing 308-021 (T75L-4201-A)
G03883676
Gauge Disc (Model 70TR) 205-D037 (D81T-4020-F50) or equivalent
G03883467
Gauge Tube (Model 70TR) 205-D038 (D81T-4020-F51) or equivalent
G03901851
Handle 205-D055 (D81L-4000-A) or equivalent
G03878572
Holding Fixture, Drive Pinion Flange 205-126 (T78P-4851-A)
G03912616
Installer, Drive Pinion Bearing Cone (Model 70) 205-005 (T53T-4621-C)
G03912935
Installer, Drive Pinion Bearing Cup 205-014 (T60K-4616-A)
G03883793
Installer, Rear Axle Bearing/Oil Seal (Model 60) 205-092 (T75T-1165-DA)
G03919261
Puller, Drive Pinion/Differential Carrier 205-D036 (D81L-4220-A) or equivalent
G03889362
Remover, Bushing 307-001 (TOOL-1175-AC)
G03883797
Remover/Installer, Bearing Cup (Model 60) 205-D051 (D81T-4628-A) or equivalent
G03883797
Remover/Installer, Bearing Cup (Model 70) 205-D052 (D81T-4628-B) or equivalent
G03883797
Remover/Installer, Bearing Cup (Model 60/70) 205-D054 (D81T-4628-D) or equivalent
G03918319
Slide Hammer 100-001 (T50T-100-A)
G03913009
Spreader, Differential Carrier 205-001 (TOOL-4000-E)