Rear Lean
WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
A side-to-side lean at the rear of the vehicle can be adjusted approximately 10 mm (3/8 inch) by installing a shim between the rear spring and the rear axle on the low side of the vehicle. A "low at the rear" vehicle can be raised approximately 10 mm (3/8 inch) by installing a shim on each side of the vehicle.