LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 770 (Front Suspension) >> Removal And Installation >> Wheel Studs >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the brake disc and hub. For additional information, refer to FRONT DISC BRAKE .
  2. Using a suitable press, remove the wheel stud from the brake disc and hub.
    Fig 1: Removing Wheel Stud
    G03883165Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
    Fig 2: Installing Wheel Stud
    G03883166Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals