LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 770 (Front Suspension) >> Removal And Installation >> Stabilizer Bar >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel and tire assembly. For additional information, refer to WHEELS & TIRES .
  2. Remove the four bolts and the stabilizer bar.
    Fig 1: Removing/Installing Stabilizer Bar
    G03883211Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.