LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 770 (Front Suspension) >> Removal And Installation >> Stabilizer Bar Bushing >> Removal

Stabilizer Bar Bushing: Removal

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the stabilizer bar. For additional information, refer to STABILIZER BAR .
  2. Using the special tools, remove the stabilizer bar bushing from the I-beam axle.
    Fig 1: Removing Stabilizer Bar Bushing From I-Beam Axle
    G03883178Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals