DTC P1380: Variable Camshaft Timing (VCT) Solenoid A Circuit Malfunction (Bank 1)
WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2005 Mercury Sable, 2005 Mercury Mountaineer, 2005 Mercury Monterey, 2005 Mercury Montego, and 2005 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.
P1380 - VARIABLE CAMSHAFT TIMING (VCT) SOLENOID A CIRCUIT MALFUNCTION (BANK 1)
| Description: | The comprehensive component monitor (CCM) monitors the VCT circuit to the powertrain control module (PCM) for high and low voltage. If the voltage falls below a calibrated limit a calibrated amount of time during testing, the test fails. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | This DTC is a circuit check. Testing should include the harness and solenoid coil. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to HK: Variable Cam Timing (VCT) STEP HK1. | ||