LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 765 (Engine Controls - Powertrain DTC Charts & Description (Except Diesel & Hybrid)) >> Diagnostic Trouble Code (DTC) Charts And Descriptions >> DTC P061D: Internal Control Module Engine Air Mass Performance

DTC P061D: Internal Control Module Engine Air Mass Performance

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2005 Mercury Sable, 2005 Mercury Mountaineer, 2005 Mercury Monterey, 2005 Mercury Montego, and 2005 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.
P061D - INTERNAL CONTROL MODULE ENGINE AIR MASS PERFORMANCE

Description:  Indicates an error occurred in the powertrain control module (PCM). This DTC is set in combination with P2106.
Possible Causes: 
  • Software incompatibility issue
  • Damaged PCM
Diagnostic Aids:  Program the PCM to the latest calibration. Cycle the key off and on. Road test the vehicle. Use the customer information to recreate the concern.
If the concern or DTC is still present, install a new PCM. Refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) .
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All Refer to the Description, Possible Causes and Diagnostic Aids for the DTC.