DTC P060B: Internal Control Module A/D Processing Performance
WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2005 Mercury Sable, 2005 Mercury Mountaineer, 2005 Mercury Monterey, 2005 Mercury Montego, and 2005 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.
P060B - INTERNAL CONTROL MODULE A/D PROCESSING PERFORMANCE
| Description: | Indicates an error occurred in the powertrain control module (PCM). This DTC is set in combination with P2104 or P2110. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Do not install a new PCM until the following steps are completed. Inspect the harness for damage. Verify correct operation of the sensors using VREF and related circuits. GO to Pinpoint Test C . If the concern or DTC is still present, install a new PCM. Refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) . |
||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to the Description, Possible Causes and Diagnostic Aids for the DTC. | ||